Chaos Calibrations Shop

0

MSV80 ECU Tuning: N52 Turbo/Supercharger Tune - E90/E92/E93 3 Series 328i - E82/E88 128i - E60 528i

$550.00
On Sale
was $699.99 Save 21%
Year
Please choose
Model
Please choose
Transmission
Please choose
ECU Variant
Intake Manifold
Please choose
Forced Induction Kit
Please choose
MAF
Please choose
Injectors
Please choose
Intercooler
Please choose
Meth Injection
Please choose
Boost Level
Enter your text
Fuel (Select ONE fuel grade unless you will be using additional/multiple fuels)
MILVS
Please choose
Exhaust Headers
Please choose
Catless Bypass Options
Please choose
Throttle Adjustment
Please choose
Thermostat Setpoint (NEW)
Please choose
Rev Limit
Please choose
Hardcut Rev Limiter (NEW)
Please choose
Increase Idle RPM
Please choose
Ghost Cam Idle
Please choose
Quiet Cold Start (NEW)
Please choose
GTS Startup Roar (NEW)
Please choose
Pop & Bang Toggle
Please choose
Pops and Bangs/Overrun
Please choose
Enable Left Foot Braking (BRT Mode) (NEW)
Please choose
Modifications (type in any other modifications in the box below)
Enter your text
E-Tune
Confirm
In stock
Product Details
Brand: Chaos Calibrations

All the boost for your N51/N52!

-Description-
Custom tuning like no other for your supercharged or turbocharged N51/N52!

We at Chaos Calibrations have worked extensively on our N51 N52 tunes. Our FI tunes have been in development for the last few years alone and we have been tuning many different configurations behind the scenes. We have worked extremely hard with the stock ECU logic to ensure maximum drivability and power under all conditions. Many supercharged and especially turbocharged vehicles can suffer from idle oscillations and weird drivability which we can all resolve with our tuning!
We can tune with both your MAF sensor installed and also MAFLess. We don't need to force the ECU into maf fault mode and cutting the MAF wire like other OTS tunes, as we can properly tune using the MAF as a correct load source. MAFLess option is only suitable for supercharged vehicles. We recommend you run with the MAF sensor since we can tune appropriately for it but if you wish to run mafless, we can tune for that as well. We properly convert your ECU load source rather than suppressing DTCs and rely on ECU fault mode like many others!

We are proud of what we do here and we have high standards! While getting a running and driver tune is not too difficult and you may not see anything the ECU is doing in the background, we don't find this acceptable. We spend a considerable amount of time to ensure your vehicle performs like stock or better with all the power you are looking for while also ensuring the ECU is happy with all that it's doing.

We are the ONLY tuning company in the world also offering tuning via mobile devices with all our in own in house built software and apps! We are capable of convenient and detailed datalogging of your N51 and N52 straight from our in-house apps unlike anyone else! No ugly 3rd party datalogging software, different flash tools, etc., ALL IN ONE APP!
iOS support is currently planned!

Note: For models with the N51 SULEV model, please select "Original" for the intake manifold option as these vehicles already came with a 3 Stage Intake manifold.
We have listed the most common parts for specking out to your tune. If you don't see what you are looking for, type it into the text box.
For custom setups or turbocharged setups, please contact us before purchasing so we can ensure the best outcome for your build.

-What's the process?-
You are purchasing our remote tuning service. After purchasing your tune, you will receive an email with our software download and instructions to begin the tuning process. It is a very straight forward process. You will need a native Windows laptop and K+DCAN OBD2 Cable.
You'll essentially check for any codes the car may have and save them. Then pull a backup of the ECU as it currently sits and send it in to us. We'll then build your base map, and send it over to you for uploading. It's easy as that!
We will then conduct datalogging to best optimize the tune to your vehicles setup.
Go to our FAQ for more details on the tuning process.
Remote Tuning Software Support:
• Windows 10/11 Laptop/PC Software
• Android Mobile App (CCFlash Mobile on Google Play Store)


MSV80 ECU Tuning REQUIRES quality cables with updated firmware. Generic cables from ebay and amazon (and similar) with outdated firmware WILL cause issues when uploading tunes to your ECU. If you are unsure if your cable is right for tuning your MSV80 ECU, feel free to ask us and we can let you know. Our Chaos K+DCAN Cable can be found here: click here

-Features-

Forced Induction Tune

  • Ignition Timing calibrated for boost.
  • Revised fueling and calibration for boost and injectors.
  • Valvetronic Enhancement
  • Reworked background engine parameters to optimize power delivery under partial and full power.
  • Revised torque model and ignition control parameters.
  • Proper MAFLess load source conversion if w/o MAF.
  • Speed Limiter Removal
  • Rev Limit Increase (Manual Only)
  • Hardcut Rev Limiter (NEW)
  • Throttle Adjustment
  • Pops and Bangs
  • Thermostat Coolant Setpoint (NEW)
  • Idle Increase
  • Ghost Cam Idle
  • Quiet Cold Start (NEW)
  • GTS Startup Roar (NEW)
  • Left Foot Braking (BRT Mode) (NEW)
  • SAP Bypass
  • Rear O2 Bypass

Dyno tuning is available, please contact us if you wish to have your car dyno tuned.


OPTIONS(explained):


THROTTLE ADJUSTMENT:

  • Adjusts the way the throttle pedal feels. "Enhancement" enhances the stock pedal feel be a bit more lively and responsive. "Linear" remaps the throttle characteristic to behave more linear.

THERMOSTAT ADJUSTMENT (NEW):

  • We target a lower coolant temperature (based on your selected option) to open the stock E-Thermostat sooner and run the engine at cooler temperatures.

HARDCUT REV LIMITER (NEW):

  • Removes that annoying soft rev limiter to a noticeable bouncing rev limiter!

INCREASE IDLE RPM:

  • Increasing idle rpm can be useful for those that have lightweight flywheels and/or stiffer engine/transmission mounts as it can remove the vibration caused by these modification.

QUIET COLD START (NEW):

  • This features aims to quiet and almost totally remove the cold start sequence. This may be beneficial to those with catless headers and loud exhausts who want a little bit of a quieter start up in the mornings.

GHOST CAM IDLE:

  • This feature makes your idle lumpy and choppy to sound like it has big cams. Also known as "Ghost Cam."
    This inherently creates rough idle. This sound affect, some enjoy, although most do not enjoy the rough idle. For this, we provide two separate tunes, one with the function on, and one with it off. Switching between the two will often require adaptations reset. This can easily be done within our software.

POPS AND BANGS/FLAMES/OVERRUN FUEL CUTOFF:

  • This feature enables pops and bangs upon lift off of the throttle. While decelerating, pops and bangs will be omitted from the exhaust. You can select varying ways of enabling this function as well as varying aggressions, some of which can be tailored to a very mild OEM spec setting or, a crazy setting with flames and loud gunshot like bangs. We know it may seem a little complicated on how you would like to have your pops active, so, we'll explain. Check out this Pop and Bang Toggle Styles to read details on the options/styles

GTS STARTUP ROAR (NEW):

  • This feature gives you that aggressive startup commonly known and found on newer GTS models :).

ENABLE LEFT FOOT BRAKING ("BRT" Mode) (NEW):

  • This feature finally enables left foot braking, allowing you to brake and apply throttle at the same time. Introducing what we like to call BRT Mode!
    Ideal for drifting, heel and toe revmatching, burnouts, turbo cars and more. Finally unleashing your N51/N52s brake + throttle performance. This means your N51/52 will no longer cut throttle when applying heavy braking. This will enable you to do burnouts and most importantly, heel-toe downshift in your manuals at the track where you previously could not.

If requested by the customer, Rear O2 and SAP "Bypasses" are intended to notify the ECU of no longer installed hardware which is already removed by the customer. This is NOT used to pass emissions testing, bypass emission equipment, manipulate emission equipment, etc. It is the customers responsibility to abide by your applicable local, state, and/or federal laws. Read our terms/conditions/disclaimer for more details.
FOR OFF ROAD USE ONLY

READ OUR TERMS/CONDITIONS/DISCLAIMERS

If you have any questions, feel free to contact us.


Want to purchase at a later time? Save this product for later!
Share this product with your friends
MSV80 ECU Tuning: N52 Turbo/Supercharger Tune - E90/E92/E93 3 Series 328i - E82/E88 128i - E60 528i